Electropress-Alfra Ltd
Electropress-Alfra Ltd Opening Hours
Monday9am – 5pm Tuesday9am – 5pm Wednesday9am – 5pm Thursday9am – 5pm Friday9am – 5pm SaturdayClosed SundayClosedThere are no reviews yet. Be the first one to write one.
Alfra Copper busbar forming machines
EngineeringAn electrical-hydraulic unit which has an electronic measure stop for precise angle of copper bar …
Alfra Copper busbar forming machines
EngineeringThis is very much like item 2 but is built into a larger table which …
Alfra Copper busbar forming machines
EngineeringA basic unit which is actuated by means of a hydraulic power unit but without …
Alfra Punching Equipment
EngineeringAlfra Punching tools & punching machines range from small hand operated punching units to large …
- 1
- 2
About Electropress-Alfra Ltd
Electropress Ltd are the sole agents for Alfra Products throughout UK & Ireland.
Our range of Alfra Machines are used for the construction of Control & Switchgear Panels but also used by Electricians – Electrical Contractors – Carpenters – & Plumbers.
Alfra electronic system ref 2420 is a 2 in one machine which can bend & punch through copper bus bar up to the size 120mm x 12mm – The range of punch and dies are from (standard) 6.6mm up to 21.5mm – non standard sizes can easily be supplied as well as square and elongated punch and dies.
This machine also has an electronic angle cut out for very accurate repeat bending and can also be fitted with a digital angle selector if required as an extra item.
The change over from bending to punching takes only a few seconds by turning a switch located on the outer casing of the machine – a cutting tool stands at the side of the machine which can be connected also in a matter of seconds and this tool will cut through copper bus bar up to 12mm thick in 5 seconds leaving a clean edge without burrs
The Alfra workshop cart ref 03980 has a working surface of 1200 x 800mm with a built in system comprising of power unit copper bus bar bending – punching – cutting up to a thickness of 120 x 12mm with 4 drawers for accessories such as punch and dies which can be locked away for safety when not in use. – this work cart can be moved around the workshop on four castor wheels or locked in one position – this machine also has the outlets to connect extra tooling such as steel punching head or cable terminal crimping head – one of the unique features of this machine is that you can 4 people working the cart at the same time – also included is a measure scale stop for bending, punching and cutting.