Ranging in size from DN 25 (1”) to DN 150 (6” nominal bore) the SK series can be supplied with most available end fittings. Threaded Swivels, BSPT, BSPP, NPT etc are often supplied up to DN 80 (3″). Flanges, Hubs and Hammer Lug Unions are available as required. Weld end prepped are available if required, however these can not be fully tested before delivery, please contact us to discuss the implications.

 

Most of our Swivel Joints can be specified to meet the requirements for Hygienic, Nuclear, Oxygen duty, Submerged, Marine and many other applications.

 

S2449

S2449

SK series – Load capacity – Tech spec 130

Styles – Tech spec 118

SK series – Threaded – Tech spec 219

SK series –  Flanged (Slip on) – Tech spec 218

SK series – Flanged (Weld neck) – Tech spec 220

SK series – Hygienic/Clear bore – Tech spec 201

SK series – Weld end – Tech spec 217

Hammer Lug Unions and any other end fitting can be supplied.

 

The SK series is normally manufactured in either Carbon Steel or 316L Stainless Steel. Super Duplex, Inconel, Hastelloy, PVC have also been supplied. Hardened Carbon Steel improves load capacity and extends life in many applications.

 

This range of swivel joints come as standard with a PTFE seal and a lithium based grease. Other seal and greases are readily available to meet your requirements.

 

High or Low Temperature options from -70C (-94F) to +200C (392F).

 

Oxygen duty, Radioactive duty, Submersible, Hygienic environments and sealed for life options available.

 

The SK Series Swivel Design is the basis for many of the bespoke designs we pro