UV Spares & Accessories

UV Spares & Accessories

Product Code: Various / Labino / Advanced NDT

UV Lamp / Bulb – DUV-35W

UV Lamp / UV Bulb Part Number: F101 (DUV-35W) 
The Labino DUV-35W is an exceptional gas discharge UV Bulb / lamp manufactured in cooperation with Phillips. Our high pressure arc bulb is characterized by superior output performance, intense UV Light with a peak at 365nm, and a service life of over 2000 hours. The Labino DUV-35W is suitable for use in all Labino MPXL 35W UV lights. Use the Labino DUV-35W bulb / lamp only with Labino electronic trigger ballast. Automotive ballast cannot be used.
Note: Due to Special Processes carried out by Labino, It is highly recommended to use genuine Labino DUV-35W bulbs / lamps in your Labino UV Light to prevent any damage to the lights internal electronics and to give maximum performance and lifetime.

Trigger Ballast Boards

Trigger Ballast Electronics used in all MPXL Lamps (100-230VAC) 
Part Number: F97 (100VAC) 
Part Number: F98 (115VAC) 
Part Number: F99 (230VAC)

Trigger Ballast Electronics used in all MPXL Lamps (12/24VDC) 
Part Number: F100 (12/24VDC)

Note: Trigger Ballast Boards must be fitted by a suitably qualified electrician. Trigger Ballast Boards carry a 12 month warranty only if installed by Labino approved suppliers.

Chargers & PSU's Mains Chargers 
For use with the TrAc Series of UV Lights. 
Part Number: B132 (TrAc Pack Standard) 
Part Number: B161 (TrAc Light) 
Part Number: B136 (TrAc Light Pro)

Power Supply Units (PSU’s) For use with the TrAc Pack Pro UV Lights. 
Part Number: B120 (230v PSU Unit – TrAc Pack Pro) 
Part Number: B122 (115v PSU Unit – TrAc Pack Pro)

Reflectors

Reflectors For use in the Labino MPXL range of UV Lights. 
Part Number: F401 (Flood) 
Part Number: F351 (Mid) 
Part Number: F301 (Spot)

Batteries

Replacement Batteries

For use with the TrAc Series of portable MPXL UV Lights. 
Part Number: B111 (TrAc Pack Standard & TrAc Pack Pro) 
Part Number: B112 (TrAc Light) 
Part Number: B113 (TrAc Light Pro)

Filters Replacement UV-B Filter Glass (Black Front Glass) 
For use with all Labino MPXL UV Lights. 
Part Number: F70

Mountings & Stands

Mountings & Brackets For use with all Labino MPXL UV Lights. 
Part Number: F800 (U-Shaped Mounting Yoke) 
Part Number: F801 (Mounting Brackets – set of two) 
Part Number: F802 (Mounting Bracket with loop – set of two)

Stands For use with Labino MPXL, SuperXenon MPXL, BigBeam (BB) and Mid Beam (MB). 

Part Number: A530 (Labino Friction Arm) – A high quality, flexible and easy-to-use support system. The system is suitable for many different applications, including Non Destructive Testing & UV-Curing, enabling the operator to work with two free hands. Jointed arm with just one large locking knob. Either free stand on the 3 leg base or clamp to bench etc. via the second clamp. 
Length: 53 cm (21”). 
Weight: 1.07 kg (2.35lb) arm only, 2.55 kg (5.61 lb) complete. 
Part Number: A531 (Super Clamp for Friction Arm)

Handle, Straps & Misc Spares Miscellaneous spares 
For use with the Labino MPXL UV Lights. 
Part Number: F141 (Pistol Handle) 
Part Number: F142 (Top Handle) 
Part Number: F62 (Cable Bend Protection) 
Part Number: S201 (On/Off switch) 
Part Number: F60 (O-ring front) 
Part Number: F143 (Shoulder Strap to suit TrAc Pack Standard & TrAc Pack Pro) 
Part Number: F145 (Shoulder Strap to suit TrAc Light Pro) 
Part Number: F61 (Heat Protection pin – one supplied)

En-Liten LED White Light Add-on
For use with all Labino Standard MPXL UV Lights. Also suitable for use with Labino BigBeam (BB Series) LED UV Lights. Part Number: L2001 (EnLiten LED White Light attachment)

LED UV Lights & Torches Spares and accessories.

Labino UVG Spares UVG2 & UVG3 Spares 
For use with all Labino UVG UV LED Torches. 
Part Number: B201 (UK Battery Charger) 
Part Number: B115 (Battery) 
Part Number: B160 (Car Charger) 
Part Number: C3100 (Hard Carry Case) 
Part Number: A600 (Tripod Stand)

VISION 365 Spares Vision 365 Spares 
For use with the VISION 365 UV LED Torch. 
Part Number: (Vision 365 Belt Pouch) 
Part Number: (UK Mains Charger) 
Part Number: (Battery)

BigBeam (BB Series) Spares

BigBeam (BB Series) Spares 
For use with the Labino BigBeam (BB Series) UV LED Lights. 
Part Number: F74 (BigBeam Filter Glass) 
Part Number: B151 (UK Mains Charger) 
Part Number: B155 (Car Charger)

Add on accessory for use with the Labino BigBeam (BB Series) UV LED Lights. Also suitable for use with Labino Standard MPXL UV Lights. 
Part Number: L2001 (EnLiten LED White Light attachment)

UV Protection

UV Eye Protection

UV Blocking Glasses 
For use with all UV Lights. 
Part Number: S404 (Over glasses for wear over prescription glasses) 
Part Number: S505 (XC)

UV Eye & Face Protection Labino UV Blocking Face Shield 
For use with all UV Lights. 
Part Number: S400 (UV Blocking Visor Full face protection) 
Part Number: S405 (Hard Hat Adaptor) 
Part Number: S410 (Spare Visor)

Note: Other spares are available please contact us with your needs.

Note:   Advanced NDT Limited Highly Recommend the use of UV Protection when working with UV Light.

Contact Advanced NDT Limited for further information & current pricing.

Click here for more information on UV Spares & Accessories