Browse through
our listings of
UK businesses

Advanced NDT Ltd.
Orchard House
Orchard Close
Worcester
Worcestershire
WR8 9JJ
T: 01905 371 460
F: 01905 371 477
E:
W: Advanced NDT Ltd.

  • 1: UV Spares & Accessories
  • 2: UV Spares & Accessories
  • 3: UV Spares & Accessories
  • 4: UV Spares & Accessories

Mouseover all images to enlarge

UV Spares & Accessories

Part no: VARIOUS, LABINO, DUV-35W


UV Spares & Accessories

 

Product Code: Various / Labino / Advanced NDT



UV Lamp / Bulb - DUV-35W

UV Lamp / UV Bulb Part Number: F101 (DUV-35W)
The Labino DUV-35W is an exceptional gas discharge UV Bulb / lamp manufactured in cooperation with Phillips. Our high pressure arc bulb is characterized by superior output performance, intense UV Light with a peak at 365nm, and a service life of over 2000 hours. The Labino DUV-35W is suitable for use in all Labino MPXL 35W UV lights. Use the Labino DUV-35W bulb / lamp only with Labino electronic trigger ballast. Automotive ballast cannot be used.
Note: Due to Special Processes carried out by Labino, It is highly recommended to use genuine Labino DUV-35W bulbs / lamps in your Labino UV Light to prevent any damage to the lights internal electronics and to give maximum performance and lifetime.


 

Trigger Ballast Boards

Trigger Ballast Electronics used in all MPXL Lamps (100-230VAC)
Part Number: F97 (100VAC)
Part Number: F98 (115VAC)
Part Number: F99 (230VAC)

Trigger Ballast Electronics used in all MPXL Lamps (12/24VDC)
Part Number: F100 (12/24VDC)

Note: Trigger Ballast Boards must be fitted by a suitably qualified electrician. Trigger Ballast Boards carry a 12 month warranty only if installed by Labino approved suppliers.



Chargers & PSU's Mains Chargers
For use with the TrAc Series of UV Lights.
Part Number: B132 (TrAc Pack Standard )
Part Number: B161 (TrAc Light)
Part Number: B136 (TrAc Light Pro)

Power Supply Units (PSU’s) For use with the TrAc Pack Pro UV Lights.
Part Number: B120 (230v PSU Unit - TrAc Pack Pro)
Part Number: B122 (115v PSU Unit - TrAc Pack Pro)



Reflectors

Reflectors For use in the Labino MPXL range of UV Lights.
Part Number: F401 (Flood)
Part Number: F351 (Mid)
Part Number: F301 (Spot)



Batteries

Replacement Batteries

For use with the TrAc Series of portable MPXL UV Lights.
Part Number: B111 (TrAc Pack Standard & TrAc Pack Pro)
Part Number: B112 (TrAc Light)
Part Number: B113 (TrAc Light Pro)


Filters Replacement UV-B Filter Glass (Black Front Glass)
For use with all Labino MPXL UV Lights.
Part Number: F70


Mountings & Stands

Mountings & Brackets For use with all Labino MPXL UV Lights.
Part Number: F800 (U-Shaped Mounting Yoke)
Part Number: F801 (Mounting Brackets - set of two)
Part Number: F802 (Mounting Bracket with loop - set of two)

Stands For use with Labino MPXL, SuperXenon MPXL, BigBeam and Mid Beam.

Part Number: A530 (Labino Friction Arm) - A high quality, flexible and easy-to-use support system. The system is suitable for many different applications, including Non Destructive Testing & UV-Curing, enabling the operator to work with two free hands. Jointed arm with just one large locking knob. Either free stand on the 3 leg base or clamp to bench etc. via the second clamp.
Length: 53 cm (21”).
Weight: 1.07 kg (2.35lb) arm only, 2.55 kg (5.61 lb) complete.
Part Number: A531 (Super Clamp for Friction Arm)


Handle, Straps & Misc Spares Miscellaneous spares
For use with the Labino MPXL UV Lights.
Part Number: F141 (Pistol Handle)
Part Number: F142 (Top Handle)
Part Number: F62 (Cable Bend Protection)
Part Number: S201 (On/Off switch)
Part Number: F60 (O-ring front)
Part Number: F143 (Shoulder Strap to suit TrAc Pack Standard & TrAc Pack Pro)
Part Number: F145 (Shoulder Strap to suit TrAc Light Pro)
Part Number: F61 (Heat Protection pin - one supplied)



En-Liten LED White Light Add-on
For use with all Labino Standard MPXL UV Lights. Also suitable for use with Labino BigBeam LED UV Lights. Part Number: L2001 (EnLiten LED White Light attachment)



LED UV Lights & Torches Spares and accessories.

Labino UVG Spares UVG2 & UVG3 Spares
For use with all Labino UVG UV LED Torches.
Part Number: B201 (UK Battery Charger)
Part Number: B115 (Battery)
Part Number: B160 (Car Charger)
Part Number: C3100 (Hard Carry Case)
Part Number: A600 (Tripod Stand)



VISION 365 Spares Vision 365 Spares
For use with the VISION 365 UV LED Torch.
Part Number: (Vision 365 Belt Pouch)
Part Number: (UK Mains Charger)
Part Number: (Battery)



BigBeam Spares

BigBeam Spares
For use with the BigBeam UV LED Lights.
Part Number: F74 (BigBeam Filter Glass)
Part Number: B151 (UK Mains Charger)
Part Number: B155 (Car Charger)

Add on accessory for use with the BigBeam UV LED Lights. Also suitable for use with Labino Standard MPXL UV Lights.
Part Number: L2001 (EnLiten LED White Light attachment)



UV Protection

UV Eye Protection

UV Blocking Glasses
For use with all UV Lights.
Part Number: S404 (Over glasses for wear over prescription glasses)
Part Number: S505 (XC)

UV Eye & Face Protection Labino UV Blocking Face Shield
For use with all UV Lights.
Part Number: S400 (UV Blocking Visor Full face protection)
Part Number: S405 (Hard Hat Adaptor)
Part Number: S410 (Spare Visor)



UTE-3 UV Inspectability Scale & Visual Comparator
For use with all UV Lights & UV LED Torches
Part Number: UTE-3

The UV Inspectability Scale is used under ultraviolet UV Light to determine if fluorescent brightness at the test surface is adequate and in proper contrast to ambient white light. It can also disclose whether the operator can see the size indication he is seeking. The scale consists of a series of fluorescent circles, within which are smaller white circles, within each of which is a fluorescent "X". The brightness of each succeeding white circle and fluorescent "X" diminishes until the last in the series is no longer visible. The scale is held at the test surface and the operator determines which of the X's he can see. If the operator cannot easily see up to and including the X at 30 percent relative fluorescent brightness, the fluorescent light source should be brought closer to the work surface or the fluorescent intensity should be increased. If, when the scale is held at the test surface, the white circles appear to be as bright as the corresponding fluorescents X's, the ambient white light is excessive and the fluorescent contrast is diminished. To correct this, the ambient white light must be reduced or the fluorescent intensity increased. Also included with the Inspectability Scale, are a fluorescent inch and metric ruler and a series of measured fluorescent dots and black dots, for defect indication comparison. The Visual Comparator consists of sentences printed in Jaeger 1 and Jaeger 2 print sizes. The operators ability to read the appropriate sentence (J1 or J2 as required by the applicable specification at the test surface) determines his ability to test under the test lighting conditions. If the operator can read the J1 or J2 lines as appropriate, under eye test conditions, but not at the test surface, test lighting is inadequate and must be corrected. Additionally, there are a series of measured lines to be viewed for determining if vision contrast is adequate under the existing lighting conditions. If the 1/64th inch line cannot be easily seen when the comparator is held at the test surface, test lighting is inadequate.

Note: Other spares are available please contact us with your needs.

Note:   Advanced NDT Limited Highly Recommend the use of UV Protection when working with UV Light.

Contact Advanced NDT Limited for further information & current pricing.

Click here for more information on UV Spares & Accessories

Trade Link: UV Spares & Accessories

Trade Pages UK Business Directory